W400 Series: Impulse Sealers

• Impulse type sealing arms are electromagnetically activated with foot pedal switch.
• Heat is applied by both upper and lower sealing bars for a positive liquid and airtight seal.  No preheating is required.  Both sealing bars are cool when not in use.
• The seal width is approximately one-eighth inch.
• An audible time-temperature cycle indicator is included on all standard units.  The audible indicator is not provided on units with optional dwell control.
• The time-temperature cycle is precisely controlled by a solid state electronic timer.  It is infinitely adjustable from a fraction of a second to five seconds for sealing a wide variety of films and film thicknesses.
• On heavy films, the operator can allow more time for a seal to set, after completion of the sealing cycle, by keeping the foot pedal depressed.
• Teflon® covering prevents firm from adhering to sealing bars during cycle.

Specifications:

W400-12

• Maximum film thickness two 10 mil thicknesses
• Bag sizes to 12" wide
• Machine dimensions 14"W x 7"H x 10"D

W400-16

• Maximum film thickness two 10 mil thicknesses
• Bag sizes to 16" wide
• Machine dimensions 18"W x 7"H x 9"D

W400-24

• Maximum film thickness two 10 mil thicknesses
• Bag sizes to 24" wide
• Machine dimensions 26"W x 7"H x 9"D

Teflon is a registered trademark of DuPont.
Specifications and design features subject to change without notice.
Some photos may show accessories not part of basic machine.

Clamco Corporation
12900 Plaza Drive
Cleveland, Ohio  44130
800.299.1655
216.267.1911
Fax:  216.267.8713
Email:  info@clamcocorp.com