5000 Series: Semi-Automatic L-Sealers

Model 5000 Semi-Automatic L-Sealer

The 5000 Series L Sealers are heavy-duty production console sealers which have a powered automatic package take-away conveyor. With the automatic take-away conveyor, the operator can produce up to fifty percent more packages in any production period. There are two types of sealers in the 5000 Series; an air operated unit and an electromagnetic unit. With the air operated unit, the arm is actuated by an air cylinder. The operator, after inserting a package in the film and moving the package to the seal area, pushes two buttons on the front of the machine starting the sealing cycle. While the next package is being inserted by the operator, the sealing arm automatically seals the package, returns to the up position, and the package is automatically conveyed to the shrink tunnel. The electromagnetic unit operates in the same sequence except that the arm is brought into the sealing position manually by the operator. This actuates the magnetic hold-down and initiates the automatic cycle to complete the package and move it automatically to the shrink tunnel.

Electronically timed 0 to 5 seconds pressure dwell control is standard. This is a requirement when sealing polyolefin films. The 0 setting permits the sealing of PVC and polyethylene films.

Solid state electronic controller with an internal adjustable heat compensator provides positive sealing element temperature with every cycle.

Optional film inverting head and power unwind system permits the inline feeding of the product, for easy transfer of package into the seal area.

Standard Features:

Air operated sealing arm with safety system
Electromagnetic held sealing arm
Positive sealing element temperature control
Dwell control
Adjustable sealing pads
Power take-away conveyor
Heavy-duty construction

Specifications:

Electrical Requirements:

220 volt, single phase, 3 wire, 10-15 amp

Air Requirements:

5 CFM at 65 psi

Accessories:

Film inverting head with power unwind
Conveyor - sealer to tunnel
Hot hole punch
Electrical hole punch
Pneumatic die punch
Vacuum scrap removal (less container)

Specifications and design features subject to change without notice.
Some photos may show accessories not part of basic machine.

Your one source for heat sealing and shrink wrap packaging machinery since 1946™

Clamco Corporation
12900 Plaza Drive
Cleveland, Ohio 44130
800.299.1655
216.267.1911
Fax: 216.267.8713
Email: info@clamcocorp.com